Bandai Action Base 1 Clear Action Base ГАНДАМ : PLAMOYA
Языки
English Français Italiano Deutsch Русский España
Справка валют

Bandai Action Base 1 Clear


Добавить в корзину:

RUB949.21   (JPY1,629)
Цены автоматически привязаны к рыночной стоимости в Японии, отдельные редкие предметы стоят дороже обычной цены.
В наличии
Информация о товарах в наличии обновляется один раз каждый день. Весь товар новый. Но состояние упаковки не гарантируется.

  • Азия (Registered Air): RUB559.39
  • Океания, Северная Америка, Центральная Америка, Ближний Восток (Registered SAL): RUB693.40
  • Европа (Registered SAL): RUB693.40
  • Южная Америка, Африка (Registered SAL): RUB774.98
В некоторых случаях вам придется заплатить таможенные пошлины.  [... подробнее (?)]

  • Code: 6706
  • Японский: バンダイプラモデル アクションベース1 クリア
  • JAN: 0783149382663, 0787799083925, 0793631768158, 0885725578733, 0899998226055, 0899998245698, 4543112521590
  • Вес товара: 0.18кг
  • Размер упаковки: 5cm x 25cm x 19cm
  • Производитель: Bandai
  • Дата выпуска: Воскресенье 28 Октябрь, 2007

Here's Bandai's Action Base -- the perfect display base for your Gundam model kits! Designed to hold Bandai's 1/144- and 1/100-scale kits from their SD Gundam, High Grade, Master Grade, and Real Robot Revolution lines, this display base is a plastic injection snap-fit assembly kit that requires very little work -- cut the parts off the runners, and snap them together! No cement or paint is required.

The octagon base and the square part that can be connected to any one of its sides come with cool mechanical detailing and panel lines, plus a total of 10 holes for placing the main stand's support pole to adjust the main stand's height. The support pole has an ingenious locking mechanism that allows it to extend or retract and remain strong enough to hold the main stand in place. The main stand itself can also be extended upwards to pose your kit in a much higher position.

The set comes with three different sizes (8mm, 9mm, and 11mm) of U-shaped holders, peg-type holders, and screw-on-type holders (two screws and a nut are included) for attaching the main stand to the crotch of the kit. When using the U-shaped or screw-on-type holders, double-sided tape (a small quantity is included) should be applied between the crotch of the kit and the holders to help hold it in place. A name plate is also included that can be attached to any one of the holes on the base.


Package size: 3.6cm x 25.4cm x 20cm
JAN: 4543112521590






Copyright © Plamoya
Tokyo, Japan
Business Hour: 9 am - 5 pm (JST), Monday - Friday excluding National Holidays